Last Updated on September 14, 2022
It’s never easy kayaking in the dark. You need to look at the front and around your vessel to pedal. Because it won’t be easy to pedal or fish in the dark while you must be seen or visible from other crafts. Otherwise, your vessel would get hit by other crafts and you can’t pedal to move ahead. Some lights have the power like a fishing headlamp and they can light up a lot of space for visibility and helping you to watch out your deck. The white LED lights sometimes would be rotatable or fixed with 360 degree appearance. You can mount them by clamp, suction cap, carabiner, T bolt, rod holders and other DIY installation systems.
A stern light with high lumen will help you to maintain your fishing equipment and see your front and other sides. But, if you use small red and green bow lights, it would likely be more useful to be seen. You can attach them with the rope and most of any kayak light would light up by AAA or AA batteries and after drying you need replacement. Like a bicycle or fishing light you can also control the beams to save the battery or necessarily use lighting beams.
- 1 8 Best Kayak Lights To Paddle or Fish Comfortably
- 2 Features That Make A Kayak Light Great
8 Best Kayak Lights To Paddle or Fish Comfortably
Meet a comparison table and picks that are picked by our small team. Hope they are going to be helpful in your mission of paddling or fishing at night.
|Name||Type||Installation Method||Our Ratings|
|Stern and Bow||Screw Down, Adhesive Pad||4.70|
Shoreline Marine All-Round
|Stern||Pad with Screw holes||4.90|
Innovative Lighting Inc. 560-2110-7
Kayalu Kayalite Kayak Light
|Stern||Steel Clip with Bungee||4.80|
Botepon Marine Boat Bow Led
Aqua Signal LED
|Stern and Bow||C Clamp, Suction Cap||4.60|
YakAttack VISICarbon Pro 360
|Stern||Rail, Rod Holder||4.70|
Whether you like kayaking at night or before dawn, you can’t do it without watching your front side and making it visible to other vessels. So, you could paddle faster without any concern while the vessels around you would simply mark your appearance. That’s why it includes two kits like a stern light and bow light. The stern light is ergonomically designed with telescopic shaft to set out the length at a certain height. You can adjust its shaft with the deck by screws or adhesive pads. The bow light also comes with the same mounting kits and you can ensure a perfect visibility by its red and green lights.
The mounting kits would help the users to install them strongly and you can permanently keep them on your kayak. The impact resistant, shatterproof lenses are also strong and efficient to meet your needs. They provide a good lifetime and consume minimal energy. That’s why you can get their illuminations up to 150 hours and 3 simple AAA batteries can run them.
- Different installments to adjust the lights on the way you want.
- Telescoping shaft to maintain the height of stern light.
- Two colors on the bow light for creating different signals.
- Shatterproof lenses are strong and provide clear and strong beams.
- Can provide service up to 150 hours for three AAA batteries.
- The adhesive pads aren’t perfect like screw mounts.
When you’ll tour or fish on the river at night, you would want to put the light on certain angles to either pedal comfortably or handle your fishing equipment without getting any complicatedness. So, this stern light comes with a base that can put the light on the most comfortable angle. At the same time you can also keep the head of it down when you don’t require to keep the light turned on. The base simply can be mounted on a flat surface and a couple of screw holes will help you to tightly install the small unit. It features an aluminum shaft that is strong and will allow your vessel to use on the saltwater without getting the shaft corroded.
It meets the United States coast guard requirements which mean you can install it on any boat that is under 39 feet in size. With 39 feet long in height it can keep you visible almost from 2 miles and if the LED bulb gets damaged you might make another purchase from their store.
- You can keep the shaft on any perfect angle to focus your objects.
- Aluminum shaft to withstand corrodes.
- Visible from almost two miles.
- Meets United States Coast Guard Requirements.
- Foldable shaft to keep the light down when it’s not in use.
- Replaceable bulb to change if the one gets damaged.
- The lens might lose efficiency under harmful UV rays.
This is almost a waterproof light and it would save it from the damages of water like when the splash or rain hits. Because the water wouldn’t be easily able to quickly reach into the point where the LED is placed. The sealed switch also remains safe from the water and if you still think the unit is going to be damaged by the rain, you would have the opportunity to remove it. You know the LED is likely to consume less energy and the LED it includes isn’t literally different. It would use 80-90% less energy compared to an incandescent and this would let the AAA batteries to provide better and expected lifetime. The LED it features might have up to 100,000 hours of lifetime.
To mount it features a suction that can keep it clung into the flat surface. Although in a kayak it would be a problem to properly install it and that’s why you would have to know some DIY tricks. But, out of all positives and negatives you can keep your vessel illuminated with achieving the most needed visibility.
- An energy saver compared to an incandescent and it runs on four AAA batteries.
- 100,000 hours of lifetime of the LED to simply survive a couple of years.
- Suction cup to easily grab the flat surface.
- Waterproof sealed switch to eliminate getting the water in.
- The water also won’t easily reach into the cover of the bulb.
- The suction cup wouldn’t properly work on some kayaks.
If you want a light that will be used in all weather conditions, probably the Kayalu Kayalite can fulfil your expectation. The scariest thing of a light is water and this stern light would win on that challenge. Because the water isn’t able to sip into the internal parts of it and it is completely submersible. So with illuminating the deck, you can leave it in the deep water either to tempt the fish or search anything. You will see an undamaged appearance even after being moved 300 meters in the water. The LED lights it uses are likely to generate the illumination with a titanium infused diffusion lens that enhances the brightness.
You can use three AA batteries to turn it on and the light will be on mood for up to 100 hours. You shouldn’t think about the installation and if your kayak has previously installed eyelet, you can quickly adjust the strong steel clip to force it to stand up. After adjusting the clip you can tighten up the bungee to properly place it on the deck.
- Fully waterproof and can be used in any weather conditions.
- Submersible to leave it in the deep of the water to tempt the fish or search anything.
- Bright LED and designed to be run on AA batteries.
- Nylon coated bunge and steel clip to attach the light with eyelet.
- Marine grade components to ensure quality.
A light with different modes of illuminations would help a user to use it precisely and this one can be used considering the condition of natural lights. So, the multiple modes like high, medium, low and strobe determine the level of illuminations you want. If you just want yourself keeping visible, the strobe mode should be a good option while the high lighting mode with 360 degree visibility can make the deck comfortable either for peadling or fishing. A specific battery compartment will also be helpful to easily set out three AAA batteries and you can easily insert them when a replacement is needed.
It comes with a suction cap where you can adjust this intelligent unit to ultimately enjoy the service. If you don’t like the suction cap, the magnetic base still offers another effective and easy way to install. Out of kayaking it is also still good for camping, hiking and hunting.
- Maintain the modes of it as you need. The five different modes do the trick.
- High 360 degree illumination completely clears up the deck.
- Specific compartment for batteries to put the batteries without difficulties.
- Magnetic base and suction cap to adjust it in two different ways.
- Still works on camping, hunting and hiking.
- Suction won’t work without a flat surface.
- Not good as a bow light.
These lights are small and useful for kayak and you can adjust them on a kayak rope to light up or enhance your visibility. The flexible body and ergonomic hooks can grab the kayak’s rope or you can attach them on the rail if your vessel features it. Like an efficient lamp it has a couple of modes to either use the steady flashes or strobe mode. They use tiny CR2032 batteries to provide the energy and these tiny batteries can retain the energies up to 35 hours when the lamps run on steady modes. If you just want other vessels to easily discover your spot, you can turn the strobe mode on and the batteries would start drying after running the LED’s for 150 hours.
You can also adjust these lights with the handle of your bike and if you are a regular outdoor person, there is no problem to depend on them. The manufacturer provides a one year warranty which makes it more dependable. You can control the whole beams by a simple and one touch switch.
- Ergonomic hooks can accommodate your kayak’s rope, rail.
- CR2032 batteries are small, easy to set up and can keep it on the beast and steady modes up to 35 hours.
- One touch switch operates three different modes.
- Also can light up your tent, road if you use it on your bike.
- One year warranty included.
- The mounting straps should be stronger and more efficient.
This is one of the perfect LED that is specifically invented for marine use. The kits it includes are very useful which are required if it comes to use on a kayak, boat, canoe, dingy or any small watercraft. It will offer you a couple of options to mount it on a suction cap, C clamp, pole assembly with U bracket and a special adapter. If you like the suction cap mount, it will let you put the light on any angle and if you know the DIY installation, you can still install it in other ways by C clamp and U bracket. The watertight and sealed body of it also enhances the protection from water and it provides an opportunity to use the steady flash when the weather goes rough.
The LED bulb it includes won’t consume huge energy and it tends to enhance the battery life. A comfortable on/off switch will let you control the beam and you need four AAA batteries to turn the mode on.
- Multiple kits to install it in different ways.
- Suction cap with flexible arm. After mounting it with a suction cap you can put the beam on any perfect angle.
- A watertight body to still illuminate in the rough weather.
- LED bulbs save energy and help to enhance the battery’s lifetime.
- It includes a carabiner to secure it with the kayak’s rope by a lanyard.
- It doesn’t hold the battery life like 50 hours.
- The suction cap wouldn’t work on all surfaces.
This is one of the comfortable lights to use on a kayak. Firstly, I would appreciate the simple and ergonomic mounting system. You literally don’t need to install any tool in your kayak to force it to stand up and stay working. If your kayak has any rod holder, you don’t need any additional tool to mount it. Because the bottom end is wrapped with thick foam and will let your kayak’s flush mount rod holder to grab it. Moreover, if your kayak comes with rails to grab multiple accessories, you could still attach it there by a specific tiny clamp that remains hidden at the end. It is collapsible and when you’ll open up the full length, it can be up to 48 inches long.
Instead of any plastic or metal, it’s been molded from fiberglass. You know the fiberglass is a material to build up the fishing rod. So, it bends a little bit like the fishing rod and this flexibility can save it from the damage of impact. The LED it comes with is able to provide a great lifetime of the battery. I mean the batteries can last up to 100 hours, which is enough for the money.
- Can be mounted on a flush mount rod holder and rail.
- Collapsible and larger in length. (After opening up the collapsible pole)
- Made from fiberglass. (A strong and flexible material which uses on a fishing rod)
- Virtually indestructible as it bends like a fishing rod.
- Powerful LED has 10,000 hours of lifetime and can illuminate up to 100 hours on 3 AA batteries.
- Not perfect to mount on scotty rod holders.
- Price is inexpensive compared to the overall quality.
Features That Make A Kayak Light Great
Water Resistance Feature
Literally any electric device in the kayak or boat isn’t safe as the water always surrounds the vessels. So, it needs proper protection from water while the condition of the weather would also impact on it. That’s why the water shouldn’t be able to access into your light, but the water has the power to damage it. Reasonably it’s better to use a sealed or waterproof lamp. If it’s not waterproof, at least it should have the minimum ability to resist the water. Some manufacturers also launched submersible lamps that are effective, especially to use on a kayak.
Literally, if you love serious kayaking or stay longer on the water for fishing, you should pick water resistant or waterproof lamp as if it can still illuminate during inclement weather. But, if you just need to go on a kayaking excursion, a non waterproof won’t matter a lot.
The installation process is different in different lights and sometimes you should be aware about the design of your kayak to ensure that your vessel can accommodate it. If you have a kayak that doesn’t have rod holders, you shouldn’t choose the one that needs a rod holder to be installed. On the other hand, some lights come with a T bolt that needs a rail to be mounted, but if your vessel doesn’t include a rail, you wouldn’t be able to install such a lamp. Moreover, if you choose a lamp that comes with a suction cap to be installed, but your kayak doesn’t have a flat surface, you could still face problem to install it. So, before getting your preferable lamp, make sure you can simply attach it with your kayak.
Out of these conventional ways of installments, you can still discover a lamp that would feature a tension rope with a carabiner. In this case there you need a D-ring to attach the carabiner. Although you can attach it to the kayak’s rope. If you aren’t still comfortable with these installments, the C clamps would be a great solution for you. Because you can attach it on any comfortable edge on the kayak with tightening or loosening the screw.
Multiple Lighting Modes
Such a lamp would feature multiple modes to use the beam precisely. But, not every light would come out with a couple of different modes. The one that is designed with a specific technology to control the beams would be great to use at night. It wouldn’t only save the energy, also you can keep the beam in a certain mode you need. The most common modes a light features are high, low, medium, strobe and SOS. They can be visible either from all corners or fixed to a specific angle. Although in most cases, they are rotatable as if the fixed one can be moved to a preferable angle .
It wouldn’t be a good experience to get the battery unexpectedly dried. It can make your journey complicated and you would be in trouble. On the other hand, buying the batteries without getting an expected service would be a waste of the money. The longer battery life will let you enjoy your journey without any concern. But, the battery life will be determined by the type and quality of the LED your lamp features. Although the number of lumens defines everything. The high number of lumens will certainly consume more energy.But if it comes with a couple of lighting modes, you could use it precisely to reduce wasting the energy.